

I just want a printer that doesn’t require you to upload your gcode to their cloud server before getting permission from them to print.
Even on Bambu’s locked-down firmware you can just toss the gcode on the SD card and print that way if you don’t want to deal with their cloud service. Or throw it on a flash drive and plug into the USB port.
My previous printer could ONLY function via SD card, so I’m kinda used to that anyway.
Don’t get me wrong, I think Bambu locking down their firmware and forcing everyone through their cloud service is shitty. But you can print without it still.
Having a sensor means you can also trust your popcorn button. Technology Connections did a great video about this, if your microwave uses the sensor properly, the popcorn button starts by clearing the chamber of moisture by running the fan and the sensor. Then it turns on the microwave element, and when the bag inflates enough to open there’s a sudden puff of moisture into the chamber. The oven detects this, and uses a lookup to determine how much longer to run the microwave element based on how long it ran the element before sensing moisture, which accounts for different sizes and weights. You’ll hear a beep and see a few seconds left on the display.
This is nearly perfect in my experience. Every now and then the popcorn is very slightly burnt, but being able to just press a button and walk away is awesome.
Definitely watch the video, I didn’t realize mine had this feature until an earlier video of his about popcorn buttons (this one, specifically).